How to Calculate Depreciation on a Rental Property
Rental property depreciation uses a 27.5-year straight-line schedule split between land and building. Here is the exact math, step by step.
Jump to section
- Why land and building have to be split first
- The 27.5-year straight-line schedule
- The mid-month convention: why your first year is never a full deduction
- Worked example: $300,000 duplex placed in service October 23, 2026
- Rental property depreciation calculator: the percentage-table shortcut
- Where this deduction shows up and what it does
- When cost segregation changes this math
- Improvements versus repairs: a separate basis question
- Ready to talk through your situation?
TLDR
Residential rental property depreciates over 27.5 years, straight-line, on the building value only. Land is never depreciable. The IRS uses a mid-month convention. That means you only get a partial deduction in the month you place the property in service, no matter the calendar day. Say you have a $300,000 rental with a $60,000 land allocation and $4,000 of allocable closing costs. The full annual depreciation deduction is $8,843.64 in a full year after it is placed in service. Your first-year amount is prorated.
Most new rental owners find out about depreciation from their tax preparer in February, not from a plan. By then the numbers are already locked into whatever the software defaulted to, usually a rough guess at the land value. That guess can cost you real deduction every single year you own the property.
Depreciation on a rental is not optional, and it is not a cash expense. You do not write a check for it. But the IRS still requires you to calculate it. Why? Depreciation reduces your taxable rental income today, and it reduces your basis (what you’re taxed on) when you sell. Skip the calculation, and you either give up a legitimate deduction every year. Or you set yourself up for a bigger surprise at sale under depreciation recapture rules.
The math is not hard once you see it laid out. It is mechanical: a few inputs, one division, one convention adjustment. This guide walks through exactly how to get the number right, with a worked example that adds up at every step.
In this guide, you’ll learn:
- Split your purchase price into land and building value the way the IRS expects
- Apply the 27.5-year straight-line schedule to the building value only
- Handle the mid-month convention for your first and last year of ownership
- Calculate a full worked example that reconciles from purchase price to annual deduction
- Know when cost segregation can accelerate part of this deduction instead of spreading it evenly
#Why land and building have to be split first
The IRS treats land and buildings completely differently. Land is never depreciable, under any circumstance. Why? Land does not wear out or get used up. The building sitting on it does. So only the building portion of your purchase gets a depreciation deduction.
This means the very first step in calculating rental depreciation is figuring out how much of what you paid was for the dirt. How much was for the structure? Skip this step, or do it carelessly, and your whole depreciation schedule is wrong from year one.
#Where to find a defensible land value
The relevant split is based on the relative fair market values of land and building when you buy. A county assessment that lists both values can be a starting point, if it reasonably reflects their relative values. An appraisal may support a different split. Do not treat the assessor’s ratio as an IRS safe harbor. Do not assume a contract allocation automatically overrides a better-supported valuation.
#What to do if the ratio looks unreasonable
Does the county ratio look unreasonable? Get a supported fair-market-value allocation, such as an appraisal. The IRS basis rule uses the relative FMV of land and building at purchase, not a fixed county percentage.
#The 27.5-year straight-line schedule
Once you have the building value isolated, the math is simple. Residential rental property depreciates straight-line over 27.5 years. That means you divide the building’s depreciable basis by 27.5 to get your full-year depreciation deduction.
This is IRC §168 territory. It uses the General Depreciation System (GDS) under MACRS (Modified Accelerated Cost Recovery System). Residential rental real estate gets a specific 27.5-year recovery period. Nonresidential commercial property, by contrast, uses 39 years. Do you own a mixed-use or commercial building? Confirm which schedule applies before you calculate anything.
“Straight-line” means the same dollar amount every full year. That is unlike equipment depreciation, which can front-load deductions. There is no accelerated option for the building itself under the standard method. A cost segregation study can carve out components of the building onto faster schedules (more on that below). But the structural shell stays on the 27.5-year line.
#The full-year math
Full-year depreciation deduction = Building depreciable basis ÷ 27.5
The full-year formula applies to a full 12 months in service. Ownership alone is not enough. The property must be ready and available for rent.
#The mid-month convention: why your first year is never a full deduction
Here is the detail that trips up almost everyone doing this by hand. The IRS does not let you deduct a full year of depreciation in the year you buy the property. That holds even if you closed on January 2nd. Instead, residential rental property uses the mid-month convention.
Under the mid-month convention, the property is treated as placed in service halfway through the month it actually became ready and available for rent. The day you closed does not matter. Say it was placed in service on October 23. You get half of October plus November and December, or 2.5 months of depreciation in year one. Closing on October 23 does not prove it was ready for rent on that date.
The same logic applies when you sell. In the year of sale, you get depreciation for half the month of sale, then nothing after that. This is why depreciation recapture calculations always need the exact month of purchase and sale, not just the year.
#Worked example: $300,000 duplex placed in service October 23, 2026
Let’s run the full calculation so every number reconciles.
Step 1: Establish the purchase price and allocation.
- October 23, 2026: the duplex is ready and available for rent. Assume it was acquired at the stated price, and the 20%/80% land/building allocation reflects relative fair market values
- Purchase price: $300,000
- Supported land/building allocation: 20% land, 80% building
- Land allocation: $300,000 × 20% = $60,000
- Building allocation: $300,000 × 80% = $240,000
Check: $60,000 + $240,000 = $300,000. ✓
Step 2: Add allocable closing costs.
- Closing costs allocable to both land and building: $4,000 (assumed for this example)
- Allocated 80% to building: $4,000 × 80% = $3,200
- Allocated 20% to land: $4,000 × 20% = $800
- Final building depreciable basis: $240,000 + $3,200 = $243,200
- Final land basis (not depreciated): $60,000 + $800 = $60,800
Check: $243,200 + $60,800 = $304,000 total basis ($300,000 + $4,000 closing costs). ✓
Step 3: Calculate the full-year depreciation rate.
- $243,200 ÷ 27.5 = $8,843.64 per full year
Step 4: Apply the mid-month convention for year one.
- Placed in service October 2026, so year one gets 2.5 months of the 12-month year
- $243,200 ÷ 27.5 × (2.5 ÷ 12) = $1,842.42 for 2026, rounding once at the end
Step 5: Confirm the full-year deductions for 2027 onward.
- Every full calendar year from 2027 through the year before sale: $8,843.64 per year
A full year in service produces a $8,843.64 straight-line deduction using the exact-basis method. Rounding, final-year adjustment, or using the IRS’s optional MACRS percentage tables can produce slightly different per-year figures; keep one method consistently.
-
$243,200
Depreciable building basis
-
$8,843.64
Full-year deduction (year 2+)
-
$1,842.42
Year-one deduction (mid-month)
#Rental property depreciation calculator: the percentage-table shortcut
If you don’t want to build the division-and-mid-month math yourself every year, the IRS gives you a shortcut: IRS Publication 946, Table A-6. It is a pre-built percentage table for residential rental property. It already has the mid-month convention baked in. You multiply your depreciable building basis by one percentage, once, and you have your year’s deduction.
#How the calculator table works
Table A-6 is organized by two inputs: the month you placed the property in service (across the top) and which recovery year you are in (down the side). Find the cell where your placed-in-service month meets Year 1. That percentage applies to your full depreciable building basis, to get your first-year deduction. Every full year after that uses the flat 3.636% rate. (Rounding varies slightly by year, under the table’s own rounding rules.) This continues until the partial final year when you sell.
| Month placed in service | Year 1 rate (Table A-6) | Year 1 deduction on $243,200 basis |
|---|---|---|
| January | 3.485% | $8,475.52 |
| April | 2.576% | $6,264.83 |
| July | 1.667% | $4,054.14 |
| October | 0.758% | $1,843.46 |
| December | 0.152% | $369.66 |
| Years 2 through 9 (any month) | 3.636% | $8,842.75 |
#Running your own numbers through the calculator table
To use the table yourself:
- Get your depreciable building basis (purchase price allocated to building, plus allocable closing costs, minus land)
- Find your placed-in-service month across the top of Table A-6
- Multiply your basis by the Year 1 percentage for that month
- Use 3.636% every full year after that, until the year you sell, which gets a partial-month rate too
For the October 23, 2026 duplex in the worked example, that is $243,200 × 0.758% = $1,843.46. That is about a dollar more than the $1,842.42 the exact-basis method produced. Either number is defensible. The tiny gap comes from rounding in the published table, not an error.
#Where this deduction shows up and what it does
This annual depreciation number flows onto Schedule E, where it offsets your rental income dollar for dollar. Do you want the full line-by-line walkthrough of where every rental number lands on that form? See our Schedule E walkthrough.
Depreciation is a non-cash deduction. So a profitable rental (positive cash flow every month) can show a tax loss on paper, once you factor in depreciation. That paper loss can offset other income, depending on your participation level, subject to the passive activity loss limits.
The catch comes at sale. The IRS requires you to reduce your basis by the depreciation you claimed, or could have claimed, even if you never actually took it. That reduced basis means a bigger taxable gain when you sell. A portion of that gain gets taxed as unrecaptured §1250 gain at rates up to 25%. We cover the full mechanics of that bill in our depreciation recapture guide. The short version: depreciate it correctly now. You are taxed on it later whether you claimed it or not.
#When cost segregation changes this math
The straight-line, 27.5-year schedule above is the default. Does a property have real value in components that wear out faster than the building shell? Think carpet, certain electrical and plumbing, parking surfaces, fencing, appliances. A cost segregation study can reclassify those components onto 5, 7, or 15-year schedules instead.
This does not change the total amount you eventually depreciate. It changes when you get the deduction. It front-loads much more of it into the early years. This is especially true when paired with 100% bonus depreciation, which OBBBA made permanent for qualifying property acquired after January 19, 2025. See our bonus depreciation 2026 guide for the mechanics and the acquisition-date cutoff. Whether the acceleration from cost segregation is worthwhile depends on study cost, holding period, available bonus depreciation, and passive-loss limits. See cost segregation fundamentals for the mechanics.
Tracking your rental’s basis, improvements, and depreciation schedule makes it easier to hand accurate records to your tax preparer each year. Bookkeeping services can support that recordkeeping.
#Improvements versus repairs: a separate basis question
Not everything you spend on the property after purchase adds to your depreciable basis. Repairs (fixing a leaking faucet, patching drywall, repainting) are generally deductible in the year paid. Improvements (a new roof, a kitchen remodel, replacing the HVAC system) get capitalized and depreciated separately. They typically start their own 27.5-year clock from the date the improvement was placed in service.
Getting this distinction wrong, in either direction, is one of the most common rental property errors we see. Some owners capitalize routine repairs and lose the current-year deduction. Others expense a full remodel and understate their basis. Our renovation and repair capitalization guide covers exactly where that line sits.
#Common questions
#Is there a rental property depreciation calculator I can just use?
Yes, in the form of IRS Publication 946, Table A-6, the percentage table covered above. It is the IRS’s own calculator. Find your placed-in-service month. Multiply your building basis by the listed percentage. Now you have the year’s deduction, without doing the mid-month math by hand. Many tax-software products and online tools automate this same table. Confirm whichever tool you use is applying the mid-month convention, not a flat 1/27.5 for every year.
#How is rental property depreciation actually calculated, step by step?
Four steps: split your purchase price into land and building using relative fair market values. Add allocable closing costs to that same split. Divide the final building basis by 27.5 years for a full-year number. Then apply the mid-month convention to prorate your first and last partial years. The full worked example earlier in this guide walks every number from purchase price to the final deduction.
#Do I have to claim depreciation on my rental?
A rental owner can fail to claim depreciation. But the allowed-or-allowable rule still reduces basis by depreciation that should have been claimed. Claiming the correct deduction each year generally avoids paying tax later on a deduction you missed. Correcting a missed year can need a formal accounting-method adjustment. Ask your preparer, rather than silently adding it to the next return.
#What if I don’t know the exact land value?
Start with a valuation that supports the land/building fair-market-value split at conversion or purchase. A county notice may be one useful comparison. Do not assume its ratio is automatically correct for the price you paid.
#Does depreciation change if I rent out only part of my home?
Yes. Do you rent a portion of your primary residence? Then you depreciate only the business-use percentage of the building’s basis, calculated by square footage or another reasonable method. The personal-use portion is never depreciated.
#Can I depreciate the property before I have a tenant?
Depreciation starts when the property is “placed in service.” That means ready and available for rent, not necessarily when the first tenant moves in. A vacant unit that is listed, cleaned, and rent-ready has typically been placed in service, even with no tenant yet.
#What happens to depreciation if I convert my primary residence to a rental?
You start a new 27.5-year schedule on the date of conversion. Use the lower of your adjusted cost basis or the property’s fair market value at the time of conversion. This is a common point where the calculation needs a fresh appraisal.
#Is there a depreciation deduction for land improvements like a driveway or fence?
Yes, but land improvements like paving, fencing, and landscaping specific to the rental use are typically depreciated over 15 years, not 27.5. They are not treated as part of the land itself. A cost segregation study usually identifies these separately.
#Does a 1031 exchange reset my depreciation schedule?
Not entirely. The part of the new property’s basis that equals the old property’s adjusted basis keeps the old schedule. Any extra basis from new money you put in starts a new schedule. You can also elect to treat all of it as new. Ask whoever prepares the exchange to run this.
#How do I handle depreciation if I co-own the property with someone else?
Each owner depreciates their proportional share of the depreciable basis, based on ownership percentage, using the same 27.5-year schedule and mid-month convention.
#Ready to talk through your situation?
The math above works for a single straightforward rental. Multiple properties, mixed personal and rental use, or a recent purchase with construction or renovation costs can all complicate the calculation fast. A free Tax Discovery call, over Google Meet, no pitch, is an easy way to get a second pair of eyes on your numbers. Free advice either way.